DJI Error Code 30064 Explained: Your Complete Fix Guide
Picture this: you’re ready to fly, your drone is powered up, and suddenly a red warning flashes on your screen—“Unable to take off (Code: 30064).” Frustrating, right? But here’s the good news: this is one of the most well-documented DJI errors, and for most cases, the fix is surprisingly simple.
TLDR; DJI Error Code 30064 is a generic “can’t take off” warning that typically appears after a firmware or app update, especially on the DJI Air 2S, Mini 3 Pro, and Mini SE . The most common fix is updating to DJI Fly App V1.9.9 (specifically version 1010) . Other causes include a weak GPS signal, a bound remote controller, or a hardware mismatch .
What Exactly Is Error Code 30064?
Error 30064 is what the community calls a “catch-all” error. It’s DJI’s way of saying, “I can’t take off, but I’m not sure exactly why.” It can be triggered by software bugs, permission issues, or hardware conflicts. It’s essentially a default error prompt that appears when the takeoff block isn’t caused by a specific function error .
The Number One Fix: Update Your DJI Fly App
The most common cause of Error 30064 is a software version mismatch, particularly after an update.
The Known DJI Air 2S Software Bug
DJI confirmed that updating to DJI Fly App V1.9.8 on the Air 2S directly causes this error . The official solution is simple:
- For Android, iOS, and Smart Controllers (RC Pro): Update to DJI Fly App V1.9.9 or higher .
- For the standard DJI RC: Update the firmware to V01.02.0600 or higher .
The “1010” Detail That Matters
Community forums revealed a specific fix: DJI Fly V1.9.9(1010-official) . If you updated to 1.9.9 but still see the error, you might be on an earlier build. Make sure you have the 1010 official version.
Other Common Causes and Fixes
1. GPS Signal and Permissions
Error 30064 can appear if the app doesn’t have proper GPS access or the signal is weak .
Fix:
- Fly in an open area with strong GPS .
- On Android, ensure the DJI Fly app has location permissions enabled. Go to Settings > Apps > DJI Fly > Permissions > Location > Allow .
- Check the GPS strength in the app before takeoff .
2. Bound Remote Controller
If the drone is still bound to a previous owner’s account, a firmware update can trigger the 30064 error .
Fix:
- Have the original owner log in and unbind the controller .
- Make sure the account and remote controller are bound properly. Path: Profile > Device Management > Value-added service > Bind New Device .
3. Hardware Modification or Loose Connection
Hardware modifications, like antenna booster mods, can cause the error . A loose internal connection can also trigger a cascade of errors, with 30064 being the visible warning .
Fix:
- Check for loose connections inside the controller .
- If a hardware mod caused the error, revert the controller to stock firmware via an APK flash on the SD card .
4. The DJI Assistant 2 “Brick” Incident
In 2022, a faulty update via DJI Assistant 2 “bricked” many Mini 3 Pros with the 30064 error . DJI acknowledged the issue and released a firmware update to fix it. If this happened to you, update to the latest firmware .
Quick Troubleshooting Checklist
If you’re seeing Error 30064, run through these steps from quickest to most involved:
- Update DJI Fly App: Check your version—is it V1.9.9 (1010) or higher? .
- Refresh Your Firmware: Reinstall the latest firmware for both the drone and controller .
- Check GPS: Move to an open area and ensure location permissions are on .
- Restart Everything: Reboot your drone, controller, and phone/tablet .
- Uninstall and Reinstall: Remove and reinstall the DJI Fly app .
- Re-bind Controller: Ensure your controller is properly bound to your account .
- Calibrate IMU: With a strong GPS signal, calibrate the IMU in Settings > Safety .
If none of these work, the problem might be hardware-related. A serial mismatch error (40021) can also trigger 30064 as a secondary warning . In this case, contacting DJI Support is your best option.
Chart: Troubleshooting DJI Error 30064
DJI Error 30064: Troubleshooting Effectiveness
Based on community reports and official fixes .
FAQ Section
1. What does DJI error code 30064 mean?
It’s a generic “unable to take off” error that can be caused by a software bug, GPS issues, or hardware conflicts .
2. How do I fix DJI error 30064?
The most common fix is updating to DJI Fly V1.9.9 (1010). Also check your GPS signal, re-bind your controller, and refresh your firmware .
3. Does error 30064 mean my drone is broken?
Usually not. It’s often a software mismatch that can be resolved with an app or firmware update. In some cases, it’s a hardware issue with the controller’s internal connection .
4. Why did DJI Assistant 2 cause error 30064?
A faulty update via DJI Assistant 2 in 2022 triggered the error on Mini 3 Pro drones. DJI later released a firmware update to fix it .
5. How do I check if my controller is bound to the drone?
Go to Profile > Device Management > Value-added service > Bind New Device. If the controller isn’t bound, the drone may not take off .
6. Can a modified antenna cause error 30064?
Yes. Hardware mods can cause loose connections or software conflicts that trigger the 30064 error. Reverting the mod or flashing the stock APK can resolve it .
References
Sources and Further Reading
- DJI Official: Unable to take off (Code: 30064) – DJI Support
- DJI Forum: DJI Air 2S 30064 Discussion – DJI Forum
- DJI Forum: DJI Mini SE 30064 Discussion – DJI Forum
- DJI Forum: Mini 3 Pro 30064 Brick Incident – DJI Forum
- Mavic Pilots: Software Mismatch Issue – Mavic Pilots
- Mavic Pilots: 40021 and 30064 Combo Error – Mavic Pilots
Have you ever been grounded by Error 30064—and did a simple update fix it, or was there another culprit? Share your story in the comments below!
